Texas Instruments 990 User Manual page 166

Applications Utilities
5.4.3.23 EXecute Tas k (XT) Canmand.
The XT command executes a specified secondary task and may pass
up to two parameters to the program. The prompts and example
res p:>ns es for t he command are ---as follows:
<>
XT
REM)TE EXECUTE TASK
SECDNDARY ID: 1002
TASK 1D: 010
PARMI: 0
PARM2: 0
(example
resp:>nses)
The resp:>nses must conform to the following requirements:
*
*
*
SECDN~RY
ID.
Enter the network 1D assigned to the
remote SCI task in the desired secondary station.
TASK ID. Enter the hexadecimal number assigned to the
tas k at the time of TX5 system generation. The def aul t
is >10.
PARMI and PARM2. The entries must be in the range of 0
through 65535 and represent val ues to be passed to the
program.
One
or both of them may be defaulted to zero
by pressing the RETURN key.
5-44
2270526-9701