RAM 3500 User Manual page 47

NOTE: To access the tutorial, press the "Uconnect™ Phone" button
BEEP, say "tutorial". Press any hard-key/button or touch the display (Touch-Screen
radio) to cancel the tutorial.
• The Uconnect™ Phone allows you to dial a phone number with your mobile
phone using simple voice commands.
• Refer to your vehicle Owner's Manual on the DVD for further details.
NOTE: The Uconnect™ Phone requires a mobile phone equipped with the
Bluetooth ® Hands-Free Profile, Version 1.0 or higher. For Uconnect™ customer
support, call 1–877–855–8400 or visit www.ramtrucks.com/uconnect.
Phone Pairing
NOTE: Pairing is a one-time initial setup before using the phone.
• Press the "Phone" button
• Wait for the "ready" prompt and BEEP.
• (After the BEEP), say "setup" or "Uconnect device setup".
• (After the BEEP), say "device pairing".
• You will then be prompted to give the phone pairing a name (each phone
paired should have a unique name).
• Next you will be asked to give this new pairing a priority of 1 thru 7 (up to
seven phones may be paired); 1 is the highest and 7 is the lowest priority. The
system will only connect to the highest priority phone that exists within the
proximity of the vehicle.
• You will then need to start the pairing procedure on your cell phone. Follow the
Bluetooth ® instructions in your cell phone Owner's Manual to complete the
phone pairing setup.
to begin.
• (After the BEEP), say "pair a device".
• Follow the audible prompts.
• You will be asked to say a four-digit
Personal Identification Number (PIN),
which you will later need to enter
into your mobile phone. You can say
any four-digit PIN. You will not need
to remember this PIN after the initial
pairing process.
ELECTRONICS
. After the
45