Temperature Span - Hunter 44428 Owner's Manual & Installation Instructions

Operations

Temperature Span

Your thermostat is pre-programmed at the factory to cycle various stages in a definite sequence. For example, if the program temperature for heat
is 68°F and 78°F for A/C, the sequence of operation for various stages will be as per the following table.
PROGRAM TEMP.
Compressor Stage I (Y1)
Auxiliary Stage I (W1)
Auxiliary Stage II (W2)
In Heat Recovery Mode, the sequence of operation of different stages during the temperature recovery period is controlled to achieve the
temperature recovery in an efficient and economical way.
TABLE
HEAT = 68°F
HEAT ON
A/C = 78°F
67
65
64
HEAT OFF A/C ON
69 79
69 —
69 —
15
A/C OFF
77
—
—