Speakers - HP Pavilion G6 Maintenance And Service Manual

Speakers

Description
Speaker Kit (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the optical drive (see
7. Remove the hard drive (see
8. Remove the keyboard (see
9. Remove the top cover (see
Remove the speakers:
1. There are two clips that hold the left speaker in place (1).
NOTE:
2. Rotate and lift the left speaker from the top cover (2). Release the speaker cable from the clips
built into the top cover.
3. Remove one PM 2.5 x 3.5 screw (3) from the right speaker that secures it to the top cover (2).
NOTE:
Battery on page
Service door on page
Optical drive on page
Hard drive on page
Keyboard on page
Top cover on page
A previously removed top cover screw also secures the right speaker in place.
This screw also secures the power button board to the top cover.
34).
35).
36).
38)
45).
48).
Component replacement procedures
Spare part number
681821-001
51