Optical Drive Cable - HP Pavilion G6 Maintenance And Service Manual

Reverse this procedure to install the processor.

Optical drive cable

Description
Optical drive cable
Before removing the optical drive cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the optical drive (see
7. Remove the hard drive (see
8. Remove the keyboard (see
9. Remove the top cover (see
10. Remove the system board (see
Remove the optical drive cable:
1. Release the optical drive cable from the clips built into the base enclosure.
2. Release the optical drive connector from the base enclosure by prying the clips (1) that secure
the optical drive connector to the base enclosure.
Battery on page 34).
Service door on page
Optical drive on page
Hard drive on page
Keyboard on page 45).
Top cover on page 48).
System board on page
35).
36).
38)
65).
Component replacement procedures
Spare part number
682742-001
75