Wiring The Fan - Hunter 42501-01 Installation And Operation Manual

All wiring must be in accordance with national and local electrical
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a
qualified electrician.
4-1. Disconnect the power by turning off the circuit breakers to the
outlet box and associated wall switch location.
4-2. To connect the wires, hold the bare metal leads together and
place a wire nut over them, then twist clockwise until tight.
4-3. Connect the wires as follows:
• Connect the green ground wire from the fan to the ground
wire from the ceiling
• Connect the white wire from the fan to the common wire from
the ceiling
• Connect the black wire and the black and white striped wire
from the fan to the black wire from the ceiling
CAUTION: Be sure no bare wire or wire strands are visible
after making connections.
4-4. Push all wires and wire nuts back through the ceiling plate hole
into the outlet box.
42501-01 • 10/24/05
42501 Sunset Boulevard.indd 7
4 • Wiring the Fan
Step 4-3
Wire Nut
Hunter Fan Company
10/24/2005, 11:04 AM
7