Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Catalog No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42508-01
20080923
©2008 Hunter Fan Co.
Type 2 Models
Type 2 Models
Type 2 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter 42508-01
Summary of Contents for Hunter 42508-01
- Page 1 __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Catalog No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 42508-01 20080923 ©2008 Hunter Fan Co. Type 2 Models Type 2 Models Type 2 Models Owner’s Guide and Installation Manual...
-
Page 2: Table Of Contents
4 • Wiring the Fan . . . . . . . . . . . . . . . . . . - Page 3 Understanding Mounting and Installer’ s Choice® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include instructions for all three Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 42508-01 • 09/23/08 • Hunter Fan Company Isolator Ceiling Plate Steps 2-3 – 2-5 3”... -
Page 6: Assembling And Hanging The Fan
For Standard or Angled Mounting: 3-1. Unbundle the wires from the fan. 3-2. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the canopy and canopy trim ring. Feed the wires from the fan through the downrod. - Page 7 3-10. Align the holes in the washer with the holes in the adapter. Assemble securely with three low profile screws. 3-11. Raise the fan and place the hook on the adapter through the loop on the ceiling plate. Loop Step 3-11 42508-01 •...
-
Page 8: Wiring The Fan
• The white wire from the ceiling to the white wire from the fan • The black wire from the ceiling to the black wire from the fan •... -
Page 9: Ring
2. Press firmly on opposite sides of the ring toward the canopy. The tabs will flex out releasing the trim ring from the canopy. 42508-01 • 09/23/08 • Hunter Fan Company Step 5-1 Tab Hole Steps 5-2 – 5-3 Canopy... -
Page 10: Assembling The Blades
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. -
Page 11: Completing Your Installation With Or Without A Multi Staked Light
7 • Completing Your Installation With or Without a Multi Staked Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. - Page 12 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. 42508-01 • 09/23/08 • Hunter Fan Company Plug Connector Lower...
-
Page 13: Fan
Install and tighten the two screws you removed previously from the other switch housing. 7-20. Carefully place the capacitors in the switch housing. 7-21. Continue with Step 7-6. 42508-01 • 09/23/08 • Hunter Fan Company Steps 7-11 – 7-16 Reversing Switch... - Page 14 8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low, and Off. • Pull the chain slowly to change settings.
-
Page 15: Troubleshooting
Problem: Lights dim when turned on or do not turn on 1. Check to make sure the wattage and type of light bulbs installed match the specifications on the light socket. 42508-01 • 09/23/08 • Hunter Fan Company 9 • Troubleshooting If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com.
Need help?
Do you have a question about the 42508-01 and is the answer not in the manual?
Questions and answers