Programming On/Off Features; Setting The Clock - Keurig Select B77 Owner's Manual

SECTION 2

Setting the clock

Setting the clock is optional. When the clock is set, the time will appear in
the LCD Control Center.
NOTE: You must set the clock if you will be using the
Auto On/Off Time programming feature.
Press the MENU Button.
1.
10
fig.
The word 'OFF' will appear at the top of the
2.
LCD Control Center to indicate that the
clock is not set (fig. 10). The programming
H M
options will appear on the LCD Control
NOT READY
Center with a small arrow pointing to 'SET
SET CLOCK
AUTO OFF
CLOCK'. "H" (Hour) will appear above the
ONOFF TIME
BREW TEMP
Left Button and "M" (Minute) will appear
BREW SIZE
above the Right Button. The "H" and "M"
MENU
icons and Left and Right Buttons will flash.
Press or hold the Left Button under the
3.
MENU
flashing "H" until you have reached the
appropriate hour. If the hour has passed 12
Set Set "PM" will be shown.
BREW
Hours Minutes
Press or hold the Right Button under the
4.
flashing "M" to set the minutes.
When you have reached the correct time, press the MENU Button five
5.
times to scroll through the remaining programming steps.
Controls & Indicators (LCD Control Center)
The correct time should now be displayed in the LCD Control Center.
6.
NOTE: If power is interrupted to the Brewer by unplugging it, or if power
is lost, follow the procedure above to reset the time as the clock will not be
visible until the time is set. Brew size setting is remembered and restored
automatically. All other settings will be restored automatically after clock
is set.

Programming On/Off Features

The Brewer provides three modes so that you can enjoy gourmet coffee, tea
or hot cocoa on your own schedule. By programming your Brewer to turn on
each morning, you will never have to wait for the Brewer to warm up to brew
a gourmet cup of coffee. It will take the Brewer approximately 4 minutes to
warm up from room temperate.
The Brewer can be left on all the time so that it is
1. Leave it ON all the time.
always ready to brew a fresh cup of gourmet coffee, tea or hot cocoa. To
turn the Brewer off at any time, simply press and release the Power Switch.
(NOTE : Although the clock remains on, if set, you can not brew a cup of coffee,
Press and release the Power Switch again to restore
tea or hot cocoa.)
power to the Brewer. You will have to wait for the water to heat up before
the Brewer is ready to brew.
2. Set the Brewer to "AUTO OFF" following a specified period of time after the
last brew.
a. Press the MENU Button twice to program the Auto Off feature. The LCD
Control Center will now display the programming options with a small
arrow next to "SET AUTO OFF" (fig. 11).
10