Keurig Select B77 Owner's Manual page 8

Table of Contents

Advertisement

Available languages

Available languages

Set-Up & First Brew
SECTION 1
Brewing Your First Cup (Continued)
Iced Beverage
Small Mug
(3.25 oz.)
(7.25 oz.)
Small Cup
Large Mug
d.
(5.25 oz.)
(9.25 oz.)
7.
8
fig.
BREWING
8.
MENU
9.
MENU
BREW
glass filled with ice on the Drip Tray Plate. Use
your favorite K-Cup
, select the Iced Beverage
®
(3.25 oz.) brew size and press the BREW But-
ton. Add more ice once brewing is complete,
add cream and sugar if desired.
Once size is chosen, press BREW Button.
BREW Button will stop flashing, Left and Right
Buttons will no longer be lit and icon
of brew size will be lit.
The LCD Control Center will now display the
word 'BREWING' and the serving size you
selected will be illuminated on LCD (fig. 8).
CAUTION: There is extremely hot water in the K-
Cup Holder during the brew process. To avoid risk
of injury, do not lift the Handle or open the
K-Cup Assembly Housing during the brew process.
There may be a short pause prior to coffee
being dispensed. The entire brew process lasts
for approximately 1 minute and ends with a
burst of air to remove all liquid from the K-Cup.
Lift the Handle, remove and dispose
of the used K-Cup.
CAUTION: K-Cup will be hot.
10.
11.
"READY TO BREW" indication will return to
Stopping the Brew Process
If you need to stop the brewing after the process has started, press and
release the Power Switch to turn the Brewer 'OFF'. The flow of coffee, tea
or hot cocoa will stop, the heating element will shut off and the blue lights
illuminating the LCD Control Center and Water Reservoir will disappear.
NOTE: You may get more coffee, tea or hot cocoa in your cup during your next
brew. We recommend that you perform a cleansing brew with water-only after
a terminated brew. Then your NEXT brew will be the volume you have selected.
adding Water
The LCD Control Center of your Brewer will indicate when the water level
in the tank is low or if the Water Reservoir has been removed by displaying
the words "ADD WATER" (fig. 9). The blue light in the Water Reservoir will
also blink when water needs to be added. The Brewer will not allow you to
brew when "ADD WATER" is displayed (fig. 9).
8
Enjoy your first cup of Keurig Brewed
gourmet coffee, tea or hot cocoa!
Your Brewer may display "NOT READY" as
it heats water for the next brew cycle. The
the LCD Control Center in about 15 seconds.
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents