Keurig Select B77 Owner's Manual page 11

b. Press or hold the Left Button under the
11
fig.
blinking "H" to advance 1 hour at a time, up
to 9 hours.
H
c. After setting the desired Auto Off time, press
NOT READY
the MENU Button four times to scroll through
CLOCK
the remaining programming options and exit
SET AUTO OFF
ONOFF TIME
the programming mode. "AUTO OFF SET"
BREW TEMP
BREW SIZE
(fig. 12) will now be displayed to indicate that it
MENU has been set.
d. To cancel the Auto Off feature, press the
MENU Button twice to reach the "AUTO OFF"
MENU
programming mode. Press and release the
x2
blue Left Button under the blinking "H"
Set
BREW
to advance one hour at a time until "OFF"
Hours
is displayed.
12
3. Program your Brewer for a specific On/Off Time.
fig.
NOTE: To use this programming feature, the
clock must be set to the correct time. The clock
will not be displayed unless the time is set.
READY
TO BREW
a. After setting the correct time (required), press
AUTO OFF SET the MENU Button three times to program
On Time feature. The LCD Control Center will
show the programming options with a small
MENU
arrow next to "SET ON TIME" (fig. 13).
b. Press or hold the Left Button under the "H"
MENU
to scroll through the hours to your desired On
Time hour.
BREW
13
fig.
H M
NOT READY
CLOCK
AUTO OFF
SET ON TIME
BREW TEMP
BREW SIZE
MENU
MENU
Set Set
BREW
Hours Minutes
14
fig.
H M
PM
NOT READY
CLOCK
AUTO OFF
SET OFF TIME
BREW TEMP
BREW SIZE
MENU
MENU
Set Set
BREW
Hours Minutes
11
c. Press or hold the Right Button under the
"M" to scroll through the minutes to your
desired "ON TIME" minutes.
d. After setting the desired time, press the
MENU Button to save the "ON TIME" and
move to the "SET OFF TIME" (fig. 14).
e. If you want to set an "OFF TIME", repeat the
procedure above in steps b & c to set your
desired "OFF TIME" (fig. 14).
f. To complete the process, press the MENU
Button two more times to exit the program-
ming mode. The Control Center will now
indicate the options you have set.
g. The Auto On time and Auto Off time functions
operate independently from one another. To
cancel either set function, follow the steps
above and use the "H" and "M" Buttons to
advance to 12:00 AM. Make sure the "M"
Button is set to :00, then change the "H"
Button. When you reach 12:00 AM, the
Control Center will display 'OFF' and the
function will be disabled.
EXAMPLE :
If you chose to set the "On Time"
at 6:55 AM and the "Off Time" for 10:00 PM,
then the Brewer will be "READY TO BREW"
and maintain hot water in the tank during that
time so that it is always ready for you to brew.
If you wanted to brew outside this window,