Installing The Motor Housing - Hunter MODEL TYPE A 41535-01 Owner's Manual And Installation Manual

5-1. Place the fan housing over the motor.
5-2. Align the keyholes in the fan housing with the two partially
installed canopy screws in the hanger bracket. Rotate the fan
housing to situate the screws in the narrow ends of the keyholes.
5-3. Install the two remaining canopy screws into the holes in the fan
housing and into the hanger bracket. Securely tighten all screws.
5 • Installing the Motor Housing
10
41535-01 • 04/04/11 • Hunter Fan Company
Step 5-1
Step 5-3
Canopy
Screw
Motor
Fan Housing