Table of Contents
Advertisement
Quick Links
We recommend that you pull everything out of the box and lay it out. We have
grouped the drawn components below with the hardware you'll need for those
parts. The screws below are drawn to scale to make it easier to identify what
piece of hardware is needed to install each component.
bag
For installing the hanger bracket and wiring the fan
x12
Blade Washer
bag
For installing the blades
Spare Parts
bag
For your convenience,
you may receive extra fasteners.
M3664-01 r121417
Here is what comes in your box:
Wood Screw
Wire Nut
Washer
x2
x4
x12
Blade Screw
bag
x4
Blade
Remote
Hunter Pro Tip:
x2
Find a part that is missing or damaged?
Don't take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at
Do not discard the hardware bags or mix parts from
different bags. Make note of the symbol printed on
each hardware bag. The symbols can be used to
identify the appropriate hardware for each step.
Ceiling Bracket
Canopy
bag
For installing the canopy
Downrod
Adapter Cover
Light Kit Assembly
Lower Switch Housing
LED Assembly
Glass
Light Kit Screw
bag
Short Light Kit
For installing the light kit
1.888.830.1326.
1886
Canopy Screw
x2
x5
x2
Screw
2
Advertisement
Table of Contents
Related Manuals for Hunter Advocate series
Summary of Contents for Hunter Advocate series
- Page 1 We recommend that you pull everything out of the box and lay it out. We have grouped the drawn components below with the hardware you’ll need for those Hunter Pro Tip: parts. The screws below are drawn to scale to make it easier to identify what piece of hardware is needed to install each component.
-
Page 2: Choosing The Right Installation Location
A little more information on Angled Mounting: For optimum performance and appearance, a longer downrod should be used with your Hunter ceiling fan when installing on high or angled ceiling. If your ceiling is angled greater than 34° you will also need an Angled Mounting Kit. -
Page 3: Wood Screws
You have two options for installation. Pick which one works best for your location. Remove any existing Hunter Pro Tip: bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan’s box. The machine screws are the ones that came with your outlet box. -
Page 4: Hanging The Fan
1886 Installing the Downrod Tighten the setscrew with pliers. DO NOT Lower the adapter cover until it rests flush HAND TIGHTEN. against the motor housing. WARNING FAN FALL HAZARD To prevent SERIOUS INJURY or DEATH: • ALWAYS tighten setscrew with pliers. •... -
Page 5: Wiring The Fan
If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualified electrician. You are going to need these: Hunter Pro Tip: Here is how to connect the wires: 4 Wire Nuts (these are in the... -
Page 6: Installing The Canopy
1886 Installing the Canopy Insert the two canopy screws found in the hardware bag. Canopy Screw Lift the canopy into place so that the screw holes are aligned. Installing the Blades: Insert the blade into the blade slot. Repeat x4 Put the blade washers found in the hardware bag onto the blade screws found in the... -
Page 7: Assembling The Light Kit
1886 Assembling the Light Kit 2 of 8 3 of 8 6 of 8 Light Kit Screw Light Kit Screw Light Kit Screw Partially install two light kit assembly screws, found in the Align the keyhole slots in the top of the light kit hardware bag, halfway into assembly with the partially installed assembly Feed the light wires through the hole in the... - Page 8 Fan not showing up the English side of this manual. in the list? Pull down to refresh! Hunter Pro Tip: Need to install the app later? When ready, turn the wall switch off and then on. Wait three minutes before downloading the app.
-
Page 9: Troubleshooting
There is no warranty for light bulbs (except where otherwise noted); remote control Please do not ship your fan or any fan parts to Hunter. Delivery will be refused. batteries; fans purchased or installed outside the United States; fans owned by What Does This Warranty Cover? someone other than the original purchaser;... - Page 10 1886 Downrod If you need a different downrod length follow these steps: Follow steps 1-5 to remove standard downrod pipe Follow steps 6-10 to reassemble with new downrod WARNING FAN FALL HAZARD To prevent SERIOUS INJURY or DEATH: • ALWAYS follow the downrod assembly instructions exactly.