Table of Contents
Advertisement
LVC-SX700_OM_NTSC
5/27/05
12:53 AM
Connections
To monitor's Video Input
or Camera Input
Page 11
3
2
1
Basic connection
The peripheral devices (VCR, monitor, lens, etc.),
AC adaptor and cables are are not supplied.
1. Connecting the monitor
Make the video signal connection between the
camera and the monitor or time lapse VCR.
2. Use a commercially available AC 24 V
adaptor.
Connect an AC 24 V power source to the AC 24V
input terminal on the back of the camera.
3. Insert the plug of this power cord into a wall
outlet.
The POWER indicator will light. Adjust the pic-
ture on the monitor using the Brightness and
Contrast controls etc.
11
Advertisement
Table of Contents
