LIP-8008E
To set LLDP:
•
In Network Config. Menu, use
802.1x configuration screen (shown),
•
Enable in LLDP? menu and press the Hold/Save button.
To configure 802.1x:
•
In Network Config. Menu, use
802.1x configuration screen (shown),
•
Enable in 802.1x menu and press the Hold/Save button.
•
Enter ID in 802.1x USER ID menu (It appears when 802.1x is
enabled.) and press the Hold/Save button.
•
Enter Password in 802.1x PASSWORD menu (It appears when
802.1x is enabled.) and press the Hold/Save button.
To set default Config. settings:
•
In Network Config. Menu, use
Default Config. Screen (shown),
•
Press the * key.
To exit Config. settings:
•
Press the
•
Press the * key to exit,
OR
•
Press the # key to Reset/Reboot the phone with new setting.
•
LLDP?
•
[ENABLED] – CHANGE [#]
•
802.1x ?
•
[ENABLED] –
CHANGE[#]
•
•
SET DEFAULT
CONFIG(DOT:*)
•
•
button,
SPEAKER
▲▼ buttons to locate the
VOL
▲▼ buttons to locate the
VOL
▲▼ buttons to locate the
VOL
49
User Guide