Led And Alarm Overview - D-Link mydlink DNR-202L User Manual

Appendix A - LED and Alarm Overview
Key
USB1 button
USB2 button
Auto Scan
button
Reset button
D-Link DNR-202L User Manual

LED and Alarm Overview

LED Color
Power & Network Red
LED
Blue
Off
USB1 LED Green
USB2 LED Green
Trigger Method
Press button for 3 seconds
Press buttonfor 3 seconds
Auto Scan function- Press scan button for 3 seconds
Camera Echo function- Press scan button for 0.5 second
Press reset pin for 10 seconds
Status Description
On Powered, Not Connected to the Network
Device Initialization (Boot Process)
Blinking Firmware Update
On Powered, Connected to the Network
Blinking Network Traffic
Off Off
On HDD Connection is Active
Blinking USB Read / Write Activity
Off Safe to Disconnect USB Drive
On HDD Connection is Active
Blinking USB Read/Write Activity
Off Safe to Disconnect USB Drive
Description
Un-mount HDD1, Buzzer will beep (long).
USB1 LED off.
Un-mount HDD2, Buzzer will beep (long).
USB2 LED off.
Start Auto Scan IP Cameras in local network.
Buzzer will beep (long).
Echo IP Camera found (1 beep for 1st camera found,
2 beeps for 2nd, 3 beeps for 3rd, 4 beeps for 4th).
Buzzer will beep (short).
Reset to factory default.
Buzzer will beep (long).
64