Live Video - D-Link mydlink DNR-202L User Manual

Section 5: Configuration
This screen shows the NVR's Live Video feeds. You may select an icon, described in the list below, to operate whichever camera
is selected from the list on the upper right side of the Live Video screen.
Recording Toggle
On Screen Display
Display Single feed
Display 2 x 2 feed
Full Screen
Glance Toggle
Control Pad
Zoom Control
Auto/Manual Focus
Focus Near/Far
Preset Path
Auto-Pan
D-Link DNR-202L User Manual

Live Video

Use this button to start/stop recording. When the
camera is recording, this indicator will change color.
Use this button to configure the various settings for
the On Screen Display (OSD).
Use this button to switch to a single camera feed in
the Live Video display area.
Use this button to switch to a 2 x 2 camera feed in
the Live Video display area.
Use this button to switch to a full-screen view of the
Live Video feed.
Use this button to toggle glance mode. In glance
mode the NVR will cycle briefly through each
connected camera.
The Control Pad is used to pan, tilt, and zoom (PTZ) a
PTZ camera.
Use the plus and minus buttons to zoom in or out.
Use this control to choose between automatic and
manual focus control.
Use this control to choose between far or near focus.
Use this option to toggle the Preset Path function.
Use this option to toggle auto-panning function.
38