Select the Enable SMTP option to start the email service of the
system. When you enable the service, you have to complete the
following settings.
z SMTP Server Address: Enter the mail server address.
For example, mymail.com.
z Sender Email Address: Enter the email address of the user
who will send the email. For example, John@mymail.com.
z Authentication Mode: Select None or SMTP according to
the mail server configuration.
z Sender User Name: Enter the user name to login the mail
server.
z Sender Password: Enter the password to login the mail
server.
z Port Number: Enter the port number used for the email
server.
When completed, click Save and then select OK. The system will
automatically start the Event Service.
Marmitek UltraViewPro
29