Marmitek IP Eye Anywhere 10 User Manual page 10

]
Camera Control Buttons provides the control buttons that
allow you to control the selected camera.
Button
/
Marmitek UltraViewPro
Function
Talk On/Off. Click to enable/disable the speaker
function of the connected camera. This option is
available only in single camera view mode.
Listen On/Off. Click to enable/disable the
microphone function of the connected camera. This
option is available only in single camera view mode.
If the connected camera features pan/tilt functions,
you can use this control panel to set the preset
positions (up to 8 positions). Once configured, you
can move the camera lens to the desired position
quickly.
To set the preset positions, adjust the camera lens
to the desired position using the Navigation buttons,
and then select the position number (1~8) from the
Set button.
To move to the preset position, simply select the
position number (1~8) from the Go button.
Navigation Buttons (Left/Right/Up/Down/Home). If
the connected camera features pan/tilt functions,
the Navigation buttons allow you to move the
camera lens position. Clicking the Home (center)
button will move the camera lens to the assigned
home position.
The Patrol/Stop buttons are used to enable/disable
the swinging function of the camera. Click Patrol to
start patrolling through the preset positions once.
Click Stop to stop patrolling.
9