Introducing The Control Panel - Minelab Safari Instruction Manual

introducing the control Panel

14
Coin
Pressing activates the Coin Detect Mode (p. 22).
Coin & Jewellery
Pressing activates the Coin & Jewellery Detect Mode
(p. 22).
Power
Pressing turns Safari On/Off.
Holding for approx. five seconds resets the detector
(p. 34) to the Factory Preset settings, prior to startup.
Pinpoint
Pressing turns Pinpoint On/Off . Pinpoint (p. 24)
assists in locating the exact position of a target prior
to recovery.
Minus & Plus (–/+)
Pressing in the Menu will step through the settings.
Pressing within a Menu setting will adjust that setting
(p. 25).
Menu
Used to access the Menu at any stage of detector
operation. This allows access to various settings (p. 25).