Front Control Panel; Search; Mode Timings; Ground - Minelab GPX-4500 Instruction Manual

Front Control Panel

24
Threshold (pg. 34) is the background
sound produced by the detector. This
control increases / decreases the level
of the Threshold.
Auto Tune (pg. 33) automatically scans
a range of frequency channels to help
reduce electrical interference.

Search

Soil /
Mode Timings
Auto Tune Custom Enhance
G N
Threshold Deep Special
Search Mode Soil/Timings
(pg. 28) Each Mode (pg. 36) allows
has factory preset you to change the
settings to suit that electronic pulses/
style of searching. timings of the
Search Modes can detector to optimise
also be customised performance for
to suit different different soils and
detecting conditions. target types.
Coil Connector
Connects the coil to the control box.
Smart Point is a connection point
for the Quick-Trak button located on
the handle.

Ground

Coil /

Coil
Balance Rx
Fixed Double D
M
Smart
Point
Tracking Cancel
Ground Balance Coil/Rx
(pg. 44)
(pg. 38) reduces allows you to
the ground change the
noise caused by transmit and
mineralisation. receive (Rx) fields
of the coil.

Rear Control Panel

Function
Select
Function Select
(pg. 50) scrolls up or
On/Off
down through the list
Hold for
of functions.
On / Off
(pg. 26)
turns the detector
on and allows you
to restore Factory
Presets.
LCD
(Liquid Crystal Display)
Displays all the menu
functions and settings.
Now with backlight
(pg. 54).
Setting
Setting (pg. 51)
Once a function
has been selected,
FP
Setting allows you to
adjust its value.
Battery Connector
connects the control
box to the battery
and headphones.
25