Heat & Glo SL-550METRO-LP Owner's Manual page 60

Overlap Fit
WITHOUT FRONT SHOWN
Finishing materials 1 inch maximum thick.
Stop finishing material flush around the opening.
= NON-COMBUSTIBLE ZONE
WITH FRONT SHOWN
DOOR
Figure 13.19 Modern Door Clean Finishing-Overlap Fit
60
36 in.
34 in.
1 in. MAX
FINISHING MATERIAL
(TOP EDGE)
Heat & Glo • SL-550METRO, SL-550METRO-LP • 2185-900 Rev. D • 8/09
Inside Fit
FINISHING MATERIAL
4 IN. MAXIMUM THICKNESS
32-5/8 IN.
(Includes 1/8 in. opening each side of door)
Finishing material between 1 and 4 inches thick.
Finishing template (METRO-TEMPLATE) may be used.
Figure 13.20 Inside Fit Door
DOOR
FINISHING MATERIAL
4 IN. MAXIMUM THICKNESS
30-5/8 IN.