Dodge Grand Caravan 2011 Owner's Manual page 285

highlighted, then press and release the SELECT button
until a check-mark appears next to the setting, showing
that setting has been selected.
Illuminated Approach
When this feature is selected, the headlights will activate
and remain on for up to 90 seconds when the doors are
unlocked with the RKE transmitter. To make your selec-
tion, scroll up or down until the preferred setting is
highlighted, then press and release the SELECT button
until a check-mark appears next to the setting, showing
that setting has been selected.
Blind Spot Alert
There are three selections when operating Blind Spot
Alert ("Blind Spot Alert Lights", "Blind Spot Alert
Lights/CHM", "Blind Spot Alert Off"). The Blind Spot
Alert feature can be activated in "Blind Spot Alert Lights"
mode, when this mode is selected the Blind Spot Monitor
(BSM) system is activated and will only show a visual
UNDERSTANDING YOUR INSTRUMENT PANEL 283
alert in the outside mirrors. The Blind Spot Alert feature
can be activated in "Blind Spot Alert Lights/CHM"
mode, in this mode the Blind Spot Monitor (BSM) will
show a visual alert in the outside mirrors as well as an
audible alert when the turn signal is on. When "Blind
Spot Alert Off" is selected the Blind Spot Monitor (BSM)
system is deactivated.
To make your selection, press and release the SELECT
button until a check-mark appears next to the feature
showing the system has been activated or the check-mark
is removed, showing the system has been deactivated.
NOTE: If your vehicle has experienced any damage in
the area where the sensor is located, even if the fascia is
not damaged, the sensor may have become misaligned.
Take your vehicle to an authorized dealer to verify sensor
alignment. Having a sensor that is misaligned will result
in the BSM not operating to specification.
4