Cmtc Reset Buttons - Dodge Grand Caravan 2011 Owner's Manual

262 UNDERSTANDING YOUR INSTRUMENT PANEL
NOTE: The system will display the last known outside
temperature when starting the vehicle and may need to
be driven several minutes before the updated tempera-
ture is displayed. Engine temperature can also affect the
displayed temperature, therefore temperature readings
are not updated when the vehicle is not moving.

CMTC Reset Buttons

CMTC Reset Button
Press the STEP button located on the steering wheel to
scroll through sub menus (i.e., Trip Functions: AVG Fuel
Economy, DTE, Elapsed Time, and Units).
To reset the display shown, turn the ignition switch to the
ON position, then press and hold the RESET button for
approximately two seconds.
When the appropriate conditions exist, the following
messages will display:
NE . . . . . . . Eight-point compass headings are displayed
14°F. . . . . . . . . . . . Temperature (Fahrenheit or Celsius)
AVG . . . . . . . . . Average Fuel Economy (U.S. or Metric)
DTE . . . . . . . . . . . . . . . . . . . . . . . Distance to Empty
ET . . . . . . . . . . . . . . . . . . . . . . . . . . . . Elapsed Time
P. . . . . . . . . . . . . . . . . . . . . . . . . . Park Assist On/Off
Should this wrench symbol display with the
letter P next to it, your Park Assist System
needs servicing. Contact an authorized dealer.
CMTC Trip Odometer (ODO)
This display shows the distance traveled since the last
reset. Press and release the STEP button on the steering
wheel to switch from odometer, to Trip A or Trip B, or to
ECO. Press and hold the RESET button while the
odometer/trip odometer is displayed to reset.
(N, S, E, W, NE, NW, SE, SW)