Target ES 1409 Operating Instructions And Parts List Manual page 5

1 Use
• Use : wet sawing new and old concrete and
asphal
• Tools : Diamond Blades - water cooled and dry -
Ø 350 mm - bore 25.4 mm
(Information from your usual Diamant Boart
supplier).
2 Technical specifications
• Depths of cut : 125 mm
• Nominal weight (empty) : 89 kg to 96 kg
(depending on model)
• Operating weight : 119 to 126 kg
• Dimensions (L x W x H) : 1150 x 600 x 930 mm
• Blade shaft RPM : 2.950
POWER
MODEL
LEVEL
Lwa (dB)
ISO 3744
HONDA GX390 106
3 Description of the machine [
Handle
1
Lowering lever
2
Graduated scale
3
Water intake tap
4
Service spanner
5
Engine
6
Disk casing
7
Front guide
8
Lifting ring
9
Belt cover
10
Engine oil drain
11
Motor voltage screw
12
Tank
13
Motor stop
14
PRESSURE VIBRATION
LEVEL LEVEL
Lpa (dB) G 89/392/CEE
ISO 3744 and 91/368/CE
92 1.3
1]
FIG.
4 Handling - Transport
Switch off the disk prior to moving the
machine on jobsite.
Remove the disk prior to hoisting,
loading, unloading and transporting the
machine on jobsite.
Height of the handle-bar adjustable by pivoting
• To position the floorsaw on the site, simply push
it. It will move easily on its four wheels without
starting the engine.
• Lock in the high position by means of the lever
(E), placing the foot on the chassis to ease lifting
[ 2].
FIG.
• For transporting by vehicle or by any kind of
lifting gear, there is a factory-fitted hoisting point
on the machine.
5 Check before starting
Please read the instructions for use
prior to operating the machine for
the first time.
Motor off.
The working
completely cleared, well lit and all
safety hazards removed (no water or
dangerous objects in the vicinity)
The
protective clothing appropriate
to the work he is doing. We
recommend that this includes
both eye and ear protection
The use of ear protection is
mandatory.
Any persons not involved in the work
should leave the working area
Use only blades marked with a
maximum operating speed greater
than blade shaft speed
area must
operator must wear
be
3