KMC Controls FlexStat BAC-1xx63 Series Installation Manual page 9

Fan Coil Unit (FCU)—
NOTE: See the FCU—Overview section on the
previous page for the 4-Pipe Modulating
option and the general schematic.
(4-PIPE 2-POSITION FCU OPTION)
XEE-6311-050 Transformer
BLU (VEP Series) or BLK (VEZ Series)
BRN (VEP Series) or RED (VEZ Series)
VEP-1xxx0186/VEZ-4xxxxMBx
Valves with 24 VAC Actuators
(See Wire
Colors
Above)
(2-PIPE MODULATING FCU OPTION)
XEE-6311-050 Transformer
(2-PIPE 2-POSITION FCU OPTION)
BLU (VEP Series) or BLK (VEZ Series)
BRN (VEP Series) or RED (VEZ Series)
© 2010 KMC Controls, Inc. BAC-1xx63 Series (6 Relays, 3 Analog Outputs)
Other Options
N.C.
N.O.
VEP-45xxB745/
VEB-43xxxBCK
Valve with
MEP-4002 0–10
VDC Actuator
STE-1454 Temp. Sensor
XEE-6311-050 Transformer
VEP-1xxx0186/VEZ-4xxxxMBx
Valve with 24 VAC Actuator
STE-1454
Temp. Sensor
Additional Resources
The latest support files
KMC Controls web site (www.kmccontrols.com). To
see all available files, you will need to log-in to the
Partners site.
For specifications, see the FlexStat Data Sheet.
For operation, configuration, troubleshooting,
and other information, see the FlexStat Operation
Guide.
For additional wiring, application, and program-
ming information, see the FlexStat Application
Guide.
For additional instructions on programming, see the
Help system for BACstage or TotalControl.
Important Notices
The material in this document is for information
purposes only. The contents and the product it
describes are subject to change without notice.
KMC Controls, Inc. makes no representations or
warranties with respect to this document. In no event
shall KMC Controls, Inc. be liable for any damages,
direct or incidental, arising out of or related to the
use of this document.
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250; Fax 574.831.5252
www.kmccontrols.com; info@kmccontrols.com
9
are always available on the
PO Box 497
Installation Guide 913-019-01I