9.3.3
Adjusting the width of the travelling armrests
The travelling armrests can be adapted to the backrest in eight widths.
Pre-requisites:
• 1x 4 mm Allen key
• Undo the bolts on both sides of the backrest
cover (1).
The photograph only shows the bolts on the left-
hand side.
• Remove the backrest cover (2).
• On the torque support, loosen the locating pin
(3) bolt (2) with the Allen key.
• Reduce the load on the armrest by raising it
slightly and then remove the locating pin.
58