Guarantee Restrictions - Philips HQ8290CC User Manual

EnglisH
22
Do not connect the shaver to the mains again after you have removed
the rechargeable battery.
guarantee & service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone number in the
worldwide guarantee leaflet). If there is no Consumer Care Centre in
your country, go to your local Philips dealer.

guarantee restrictions

The shaving heads (cutters and guards) are not covered by the terms of
the international guarantee because they are subject to wear.
troubleshooting
1 The shaver does not shave as well as it used to.
- The Jet Clean System may not have cleaned the shaver properly
because the cleaning fluid in the cleaning chamber is soiled or the
cleaning fluid level is too low. Clean the shaver thoroughly before you
continue shaving. If necessary, clean and refill the cleaning chamber
(see chapter 'Cleaning and maintenance').
- The shaving heads may be damaged or worn. Replace the shaving
heads (see chapter 'Replacement').
- Long hairs may be obstructing the shaving heads. Clean the cutters
and guards with the brush supplied (see chapter 'Cleaning and
maintenance').
2 The shaver does not work when I press the on/off button.
- The battery may be empty. Recharge the battery (see chapter
'Charging') or connect the shaver to the mains.
- The travel lock may be activated. Press the on/off button for 4
seconds to deactivate the travel lock.
- The temperature of the shaver may be too high. In this case, the
shaver does not work. As soon as the temperature of the shaver has
dropped sufficiently, you can switch on the shaver again.