Removing The Rechargeable Shaver Battery - Philips HQ8290CC User Manual

an official collection point for recycling. By doing this, you help to
preserve the environment (Fig. 38).
- The built-in rechargeable shaver battery contains substances that may
pollute the environment. Always remove the battery before you
discard or hand in the shaver at an official collection point. Dispose of
the battery at an official collection point for batteries. If you have
trouble removing the battery, you can also take the appliance to a
Philips service centre. The staff of this centre will remove the battery
for you and will dispose of it in an environmentally safe way.

removing the rechargeable shaver battery

Only remove the rechargeable battery when you discard the shaver.
Make sure the rechargeable battery is completely empty when you
remove it.
1 Disconnect the shaver from the mains or remove it from the Jet
Clean System.
2 Let the shaver run until it stops and undo the two screws in the
back of the shaver (Fig. 39).
3 Undo the two screws in the hair chamber (Fig. 40).
4 Remove the back panel (Fig. 41).
5 Remove the two side panels (Fig. 42).
6 Bend the 4 hooks aside and take out the power unit (Fig. 43).
Be careful, the hooks are sharp.
7 Undo the three screws in the power unit (Fig. 44).
8 Remove the power unit cover with a screwdriver (Fig. 45).
9 Remove the battery.
Be careful, the battery strips are sharp.
Do not put the shaver back into the plugged-in Jet Clean System after
you have removed the rechargeable battery.
EnglisH
21