BBQ GSC3219TA Owner's Manual page 10

Step 5
a) Loosen the two pre-installed
bolts on the bracket (F) and
allow 1/4 bolt's length to
extend from the bracket.
b) Align the two holes on the left
side panel with the two bolts
extended from bracket.
Push down the bracket until it
c)
locks into place.
d) Align the two holes on the
bracket with the two holes on
the cart bottom.
e) Insert one bolt (EE) with one
spring washer (GG) and one
flat washer (FF) into each
pre-drilled hole. Tighten bolts
by hand until secure.
f) Go back and tighten all bolts
using the screwdriver
provided.
Step 6
a) Pull out the tank holder (W)
on the cart bottom.
b) Align the holes on the roller
guides of tank holder with
the holes on the cart bottom.
c) Insert one bolt (BB) with one
flat washer (CC) and one
spring washer (DD) into
each pre-drilled hole.
d) Go back and tighten all bolts
using the screwdriver
provided.
e) Insert the tank clip (V) into
the holes on the tank holder.
M6×15 bolt
BB
M6 flat washer
CC
M6 spring washer
DD
GSC3219TA
Owner's Manual
M4×15 bolt
EE
M4 spring washer
GG
M4 flat washer
FF
4 PCS
4 PCS
4 PCS
2 PCS
2 PCS
2 PCS
9