Template Routing Sub Menu; Keyboard Channel & Port; Common Channel & Port; Template Grouping Sub Menu - Novation SL MkII User Manual

Channel Port - ChanPort
This sets whether these control messages are included in the keyboard zones or not as follows:
Template
The above controls follow the individual settings as set in Edit mode The settings in the Keyboard Zones menu are ignored.
Zone
The above controls follow the individual settings as set in Keyboard Zones menu. The settings in the Edit menu are ignored.

Template Routing Sub Menu

Although it is possible for the user to edit the Automap Template from the SL MkII, editing the following settings for the
Automap Template should NOT be done.
Keyboard Channel, Keyboard Port - KeybChan, KeybPort
These settings define which MIDI Channel and Port the Keyboard, Mod / Pitch Joystick , Sustain and Expression pedals
are sent to.
Note that these settings do not take effect if Zones are active.
Common Channel, Common Port - ComnChan, ComnPort
These settings define which MIDI Channel and Port the all Pots, Encoder, Sliders, Buttons and XY pad are sent to.
Both Keyboard and Common settings (above) provide a way of changing the routing of multiple controls from one knob.
For example, in control edit options (see final chapter) setting each individual control to Common Channel and Common
Port, rather than a specific Channel and Port, means that to change the Channel and Port of all controls is done via the
routing sub menu (above) rather than editing each individual controls routing.

Template Grouping Sub Menu

Template
This displays the template that is currently being edited.
Position, Size
Multiple templates can be grouped together. The Position and Size values show how multiple templates are grouped.
These values can be changed (i.e. to group and un-group) templates.
Note:
Grouped templates must first be saved in adjacent positions.
Position and size values must be correct for changes to be saved.
E.g. for a group of 3 templates there must be 3 adjacent templates, each set to a size of 3, and with positions of
1, 2, 3 respectively.
Remember, for changes to be saved, the write button needs to be pressed for all templates in the group.
To step through templates within a group press any of the row select buttons multiple times.
24