TCP/IP Protocol Installation
1.
Click Start, point to Settings and select Control Panel.
2.
Double click the Network icon.
3.
If the TCP/IP Protocol is not already installed, click Add.
4.
Select Protocol and click Add.
5.
Select Microsoft from the Manufacturers list.
6.
Select TCP/IP Protocol from the Network Protocols list.
7.
Specify an IP address, Subnet Mask, and Gateway address or specific "Obtain IP
address automatically", if a DHCP server is available on the LAN.
8.
Restart the computer.
9.
Done.
Note: Using TCP/IP protocol to access the print server requires well-configured TCP/IP
settings. If you are not familiar with these settings, please consult your network
administrator for details or ask for help.
IPX/SPX-compatible Protocol Installation
1.
Click Start, point to Settings, and select Control Panel.
2.
Double click the Network icon.
3.
If the IPX/SPX-compatible Protocol is not already installed, click Add.
4.
Select Protocol and click Add.
5.
Select Microsoft from the Manufacturers list.
6.
Select IPX/SPX-compatible Protocol from the Network Protocols list and follow the
instructions on the screen.
7.
Restart the computer.
8.
Done.
63