Graco 824-002 Owner's Manual page 37

Some parts in Rev. A of manual 824–000 have changed but have not yet been changed in the
instruction manual. Please note the changes below and mark them in your manual or keep
this sheet with your manual.
Series
Letter
Assembly No. Change
Models 824–002
Other Changes
Add the following data to the Technical Data section of your instruction manual.
Sound Data*
*Sound Level . . . . . . . . . . . . . . . . . . . . . . . . . .
*Sound Power . . . . . . . . . . . . . . . . . . . . . . . . . .
*Measured while spraying with an .017 in. tip, ISO 3744–1981
Add the following data to the Accesssories section of your instruction manual.
Fluid Filter Kit 820–964
Filters particles from fluid stream. Includes manifold filter and installation instructions.
Upright Cart Kit 821–065
Convert sprayer to tall wheeled cart.
Low Profile Cart Kit 821–062
Convert sprayer to low profile cart.
Parts Change Notice
Part That Ref
Changed No.
– 820–965 47
820–447 4g
820–439 4c
80.1 dB(A)
95.2 dB(A)
Part Description Description of Change
MOTOR START Replaced by 820–914
BOARD
WIRE, terminal One of 4c changed to 4g
WIRE, terminal Replaced by 820–446 (18 AWG),
Quantity changed to one
8X4–000
Rev. B
Supersedes Rev. A
22 JAN 96