Reversing Lamps; Fog Lamps - Chevrolet 2012 Malibu Owner's Manual

9-34 Vehicle Care
6. For the driver side, reinstall the
windscreen washer bottle filler
neck by firmly pushing it straight
into the bottle. Ensure that the
filler neck clip engages into the
underbonnet electrical centre
retainer.

Fog Lamps

To replace the front fog lamp bulb:
1. Remove the six access panel
fasteners located under the front
fascia.
2. Disconnect the electrical
connector from the fog lamp bulb
assembly.
3. Remove the bulb by turning it
anticlockwise and pulling it
straight out of the assembly.
4. Install the new bulb by turning it
clockwise into the assembly.
5. Reverse Steps 1 and 2 to
reinstall.
Tail lamps, Indicator,
Brake lamps, and

Reversing Lamps

A. Reverse Light
B. Tail lamp
Boot Deck Inboard Tail lamp and
Reversing Lamp
1. Open the boot. See Boot on
page 1‑11.
2. Remove the push pins and pull
back the boot deck trim.
3. Remove the bulb socket by
turning anticlockwise and pulling
straight out.
4. Remove the bulb from the
socket.
5. Install the new bulb in the
bulb socket.
6. Install the bulb socket by
turning clockwise.
7. Install the boot deck trim.