Shifting Out Of Park - Chevrolet 2012 Malibu Owner's Manual

Hide thumbs Also See for 2012 Malibu:
Table of Contents

Advertisement

If torque lock does occur, your
vehicle may need to be pushed
uphill by another vehicle to relieve
the parking pawl pressure, so you
can shift out of P (Park).

Shifting out of Park

This vehicle is equipped with an
electronic shift lock release system.
The shift lock release is
designed to:
.
Prevent ignition key removal
unless the shift lever is in
P (Park) with the shift lever
button fully released.
.
Prevent movement of the shift
lever out of P (Park), unless the
ignition is in ON/RUN and the
brake pedal is applied.
The shift lock release is always
functional except in the case of an
uncharged or low voltage (less than
9-volt) battery.
If the vehicle has an uncharged
battery or a battery with low voltage,
try charging or jump starting the
battery. See Jump Starting on
page 9‑64.
To shift out of P (Park):
1. Apply the brake pedal.
2. Place the ignition in ON/RUN.
3. Press the gear lever button.
4. Move the shift lever to the
desired position.
If still unable to shift out of P (Park):
1. Fully release the gear lever
button.
2. Hold the brake pedal down and
press the gear lever button
again.
3. Move the shift lever to the
desired position.
If you are still having a problem
shifting, see your dealer.
Driving and Operating
Shift Lock Manual Release
If jump starting the vehicle did not
work, the shift lock manual release
must be used.
To access the shift lock manual
release:
1. Apply the parking brake.
2. Release the gear lever trim from
the centre console at the rear,
then fold upward and rotate to
the left.
8-23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents