Headlamps, Front Indicator And Parking Lamps - Chevrolet 2012 Malibu Owner's Manual

9-32 Vehicle Care
Headlamps, Front
Indicator and Parking
Lamps
Base Headlamp Assembly
(Passenger Side Shown,
Driver Side Similar)
A. Main Beam Headlamp
B. Indicator Lamps
C. Dipped-Beam Headlamp
D. Daytime Running Lamp (DRL)/
Position Lamp
Up-Level Headlamp Assembly
(Passenger Side Shown,
Driver Side Similar)
A. Indicator Lamp
B. Daytime Running Lamp (DRL)/
Position Lamp
Dipped-Beam Headlamp (Base)
1. For the driver side bulb, remove
the windscreen washer bottle
filler neck by firmly pulling it
straight up and out of the bottle.
2. Remove the cap from the back
of the headlamp assembly by
turning it anticlockwise.
3. Disconnect the electrical
connector (A).
4. Disengage the spring clip (B)
from the bulb by pressing down
on the end and then swing
upwards.
5. Remove the bulb from the lamp
assembly.
6. Install a new bulb in the lamp
assembly.
7. Install the spring clamp.
8. Connect the electrical connector.
9. Replace the cap from the back
of the headlamp assembly by
turning it clockwise.