Running The Vehicle While - Chevrolet 2012 Malibu Owner's Manual

8-26 Driving and Operating
Particulate Filter Messages on
page 4‑38. illuminates when
diesel particle filter is full. Start
cleaning process as soon as
possible. flashes when diesel
particle filter has reached the
maximum filling level. Start cleaning
process immediately to avoid
damage to the engine.
Cleaning Process
To activate cleaning process,
continue driving, keep engine speed
above 2000 revolutions per minute.
Shift down if necessary. Diesel
particle filter cleaning is then
B
started. If illuminates
additionally or a warning message
appears in the DIC, cleaning is
not possible. Seek the assistance of
a workshop.
Notice: If the cleaning process is
interrupted, there is a risk of
provoking severe engine damage.
Cleaning takes place quickest at
high engine speeds and loads. Do
not switch off the engine until the
cleaning process is complete. This
is indicated by the extinguished
indicator light .
{
WARNING
During DPF self cleaning or
during extended idling in P (Park),
the exhaust system and exhaust
gases are very hot. Things that
burn could touch hot exhaust
parts under the vehicle and ignite.
You or others could be burned.
Do not park, or idle for an
extended period of time, near or
over papers, leaves, dry grass,
or other things that can burn.
Keep the exhaust area clear of
material that could ignite or burn.
See Parking over Things That
Burn on page 8‑24 for more
information.
Running the Vehicle
While Parked
It is better not to park with the
engine running. But if you ever have
to, here are some things to know.
{
WARNING
Idling a vehicle in an enclosed
area with poor ventilation is
dangerous. Engine exhaust may
enter the vehicle. Engine exhaust
contains carbon monoxide (CO)
which cannot be seen or smelled.
It can cause unconsciousness
and even death. Never run the
engine in an enclosed area that
has no fresh air ventilation. For
more information, see Engine
Exhaust on page 8‑25.