Introduc On; Foreword; Conven Ons; Terminology - Firefly Cygnus CYG2400/460/24 User Manual

Cygnus portable solar generator
Table of Contents

Advertisement

1.  Introduc on
1.1

Foreword

Firefly  Solar  Generators  Limited  takes  this  opportunity  to  congratulate  you  on  the  purchase  of  your  new  Cygnus  Porta-­‐
ble  Solar  Generator.
Designed  and  manufactured  within  the  United  Kingdom  using  only  the  finest  European  sourced  electrical  components,  
your  new  Cygnus  Portable  Solar  Generator  offers  sustainable  power  genera on  with  the  reliability  that  you  demand.
The  purpose  of  this  manual  is  to  introduce  you  to  the  Cygnus  Portable  Solar  Generator  and  provide  you  with  a  guide  to  
the  processes  of  se ng  up  and  opera ng  your  new  product.  This  manual  describes  how  your  Cygnus  Portable  Solar  
Generator  works,  will  help  you  with  fault  finding  and  examines  what  each  component  is  doing  and  why.
1.2

Conven ons

Throughout  this  user  manual  the  following  symbols  are  used:
This  symbol  warns  of  the  presence  of  a  dangerous  voltage  which  could  cause  harm  to  the  operator.
This  symbol  indicates  the  poten al  of  damage  to  the  unit  or  connected  devices.
This  symbol  indicates  important  or  useful  informa on.

1.2.1 Terminology

The  following  terms  are  used  in  this  manual  to  provide  greater  clarity:
Firefly  Solar  Generators  Ltd.  will  be  referred  to  as  "The  manufacturer".
The  Cygnus  Portable  Solar  Generator  will  be  referred  to  as  'Cygnus'  or  'Unit'.
Any  items  that  consume  power  will  be  referred  to  as  'Consumers'.
State  of  Charge  of  the  ba ery  bank  will  be  referred  to  as  'SOC'.

1.2.2 Warnings

This  user  manual  is  an  important  part  of  the  Cygnus  Portable  Solar  Generator.  It  must  be  kept  
available  to  all  operators  and  kept  close  to  the  unit  so  that  it  can  be  referred  to  at  any   me.
When  the  unit  is  opera ng  it  generates  poten ally  lethal  voltages.  Work  must  only  be  performed  on  
the  unit  by  the  manufacturer  or  a  qualified  service  engineer  approved  by  the  manufacturer.
Under  no  circumstances  should  operators  open  the  unit's  enclosure.
All  items  connected  to  the  unit  including  distribu on  cables  and  boxes  should  be  regularly  checked  
and  adhere  to  the  same  local  regula ons  and  standards  as  a  regular  grid- ed  mains  installa on.
Cygnus  User  Manual  -    v3.0            2011  
               W  A  R  N  I  N  G
W  A  R  N  I  N  G
Page   4
 

Advertisement

Table of Contents
loading

Table of Contents