Securing A Child Restraint In A Rear Seat Position - Chevrolet 2007 Optra Owner's Manual

3. Push and pull the child restraint in different
directions to be sure it is secure.
If the position you are
using has a head
restraint and you are
using a single tether,
route the tether under
the head restraint and in
between the head
restraint posts.
If the position you are
using has a head
restraint and you are
using dual tether, route
the tether under the
head restraint and
in between the head
restraint posts.
Securing a Child Restraint in a
Rear Seat Position
If your child restraint has the LATCH system, see
Lower Anchors and Tethers for Children (LATCH)
on page 51.
If your child restraint does not have the LATCH
system, you will be using the lap-shoulder
belt to secure the child restraint. Be sure to follow
the instructions that came with the child restraint.
Secure the child in the child restraint when and as
the instructions say.
1. Put the child restraint on the seat.
2. Pick up the latch plate, and run the lap and
shoulder portions of the vehicle's safety belt
through or around the restraint. The child
restraint instructions will show you how.
59