Front Turn Signal And Parking Lamps - Chevrolet 2007 Optra Owner's Manual

Front Turn Signal and Parking Lamps

To replace a front turn signal or parking lamp
bulb, do the following:
1. Open the hood. See Hood Release on
page 257 for more information.
2. Remove the two bolts from the top of the
headlamp assembly and one nut on the
inside that retains the headlamp assembly.
Wagon Models
292
Hatchback Models
3. Turn the bulb socket counterclockwise.
4. Pull the bulb socket out of the lamp housing.
5. Press the bulb inward and turn it
counterclockwise to remove it from the
bulb socket.
6. Install the new bulb into the bulb socket by
pressing it in and turning it clockwise.
7. Reinstall the bulb socket into the lamp
housing by turning it clockwise.
8. Reverse Steps 1 through 2 to install the
assembly.