ECS P5TX-Apro User Manual page 79

P5TX–Apro User's Manual
4: Reference Information – 4.35
Resources Controlled By
When this line is set to Auto the BIOS will automatically con-
figure IRQ and DMA resources. This is the recommended set-
ting. If you set this line to Manual, the screen changes as shown
above and allows manual configuration. In general you should
only need to do this if you are installing an ISA card that requires
manual configuration.
Reset Configuration Data
The default setting is 'Disabled'. If you need to clear the ESCD
data, set this to 'Enabled'. The data will clear automatically and
the BIOS will reset this line to the 'Disabled' setting.