Table of Contents
Advertisement
AEC-67160 Ultra160 SCSI Adapter
Chapter 2 Hardware Installation
2.1 Installing the Ultra160 SCSI Adapter
Step 1: Turn off the computer.
Step 2: Plug out the power core and all the connection of external devices from your
system.
Step 3: Referring your original case user's manual to see how to open your case.
Step 4: Select one unused PCI expansion slot of your computer. Unscrew the slot
cover and remove it.
Step 5: Remove the SCSI host adapter from
the anti-static bag and hold its metal
bracket part.
Step 6: Plug the AEC-67160 SCSI adapter
card into the unused PCI slot with
care on the bottom of edge. Then fit
the adapter bracket on case frame
just like a slot cover.
2.2 Installing Internal Drives
Power Connection
For internal devices, connect DC core power directly from power supply to device.
Cable Connection
For internal connector
Step 1: Identify number of pins on the connectors, either adapter or device. Then,
prepare a ribbon cable whose connectors match your need, e.g. 50-pin to
50-pin, 68-pin to 68-pin, or 68-pin to 50-pin.
Step 2: Find out where each pin-1 of connectors located on the cable and host
adapter. Then connect one end of SCSI cable to the connector of host
adapter aligning with pin-1 to pin-1.
Note: Usually, a color wire on the edge of cable indicates pin 1 of
connector, and a mark also shown on the adapter board.
7
PCI slot
Advertisement
Table of Contents
