Adapter Setup - Acard AEC-67160 Ultra160 User Manual

3.1.1.2 ADAPTER SETUP

"Host Adapter SCSI ID: Adapter ID number. Default is 7
"Host Adapter BIOS: Use host adapter BIOS. Default Enable
"PCI Master-DMA Burst Mode: This selection is the burst mode for PCI
Master DMA. Default is Enable
"Host adapter SCSI termination: For SCSI terminator activate or inactivate.
Default is Automatic
"Support removable disk as a fixed disk: This function is for removable disk
select as Fixed disk. Default is Disable
"Support multiple LUN: Select use of multiple LUN or not. Default is 0
"SCSI parity check: Choose whether to support SCSI parity check or not.
"SCSI device disconnection: Select support SCSI device
disconnection.
"Extended BIOS transfer for Drivers > 1GB: The Disable backward
compatible with the AHA1542B format.
"CD-ROM bootable: Enable to support the SCSI CD-ROM boot.
"Include In Scan: Select the needed ID number for scan when boot.
AEC-67160 Ultra160 SCSI Adapter
12