Chapter 2 Hardware Installation; Installing The Ultra160 Scsi Adapter; Installing Internal Drives - Acard AEC-67160M Ultra160 User Manual

Chapter 2 Hardware Installation

2.1 Installing the Ultra160 SCSI Adapter

Step 1: Turn off the Mac computer.
Step 2: Plug out the power core and all the connection of external devices
from your system.
Step 3: Referring your original case
user's manual to see how to
open your case.
Step 4: Select one unused PCI
expansion slot of your
computer. Unscrew the slot
cover and remove it.
Step 5: Remove the SCSI host
adapter from the anti-static
bag and hold its metal bracket
part.
Step 6: Plug the AEC-67160M SCSI adapter card into the unused PCI slot
with care on the bottom of edge. Then fit the adapter bracket on
case frame just like a slot cover.

2.2 Installing Internal Drives

Power Connection
For internal devices, connect DC core power directly from power supply to
device.
Cable Connection
For internal connector
Step 1: Identify number of pins on the connectors, either adapter or device.
Then, prepare a ribbon cable whose connectors match your need,
e.g. 50-pin to 50-pin, 68-pin to 68-pin, or 68-pin to 50-pin.
Step 2: Find out where each pin-1 of connectors located on the cable and
host adapter. Then connect one end of SCSI cable to the
connector of host adapter aligning with pin-1 to pin-1.
AEC-67160M Ultra160 SCSI Adapter
7
PCI slot