Device Driver Installation; Windows 95/98/Me Environment - Acard AEC-67160 Ultra160 User Manual

4.2 Device Driver Installation

4.2.1 Windows 95/98/ME Environment

Automatic Setup
Install Automatic Setup for Windows 95/98/ME before plugging the
SCSI adapter into the system.
1. Insert disk1.
2. Press [Start] then click on [Run].
3. Type A:\setup32.exe or press [Browse] to find this file.
4. Press [enter]. Then it will install SCSI driver.
5. Shut down the system.
After completing software automatic installation, plug the SCSI
adapter into the system. Please refers to "Hardware installation
procedures". Then boots up the computer again. The system will
setup the configuration automatically.
Manual Installation Procedure
The driver can be installed manually after plug in the AEC-67160.
Please refers to the stages at below:
1. Turn on the computer after plug the adapter in.
2. The system will detect the new devices and ask for directory of
access to the device's driver. Click "Next" to the next screen.
AEC-67160 Ultra160 SCSI Adapter
18