Selling Point Descriptions - Hitachi CR 13VBY Technical Data And Service Manual

4-1. Selling Point Descriptions

(1) Vibration is greatly reduced thanks to the counter weight mechanism
There is a low-vibration counter weight mechanism in the Model CR 13VBY. Vibration is suppressed by
reciprocating the counter weight in a direction opposite to the plunger that reciprocates in forward and
backward direction. Thus the Model CR 13VBY can greatly reduce vibration experienced by the user during
cutting operation (about one third of the vibration level of the current Model CR 13VA).
Plunger
(Reciprocating shaft)
(2) Fast cutting speed thanks to the high-power motor
The Model CR 13VBY can cut various construction materials efficiently thanks to the high-power motor whose
maximum output is over 1,300 W. The number of strokes is also increased to "0 to 3,000 min
CR 13VA: 0 to 2,800 min
(3) Speed selectable dial and switch trigger
The Model CR 13VBY is equipped with the electronic control circuit to adjust the cutting speed steplessly by
means of the dial and the switch trigger depending on working conditions and workpieces.
<Low-vibration mechanism>
Reciprocating in opposite directions
Plunger
Counter weight
-1 ) for faster cutting speed.
Counter weight
--- 2 ---
Gear
-1 " (Model