Step By Step Guide; Switch Setting - Telstra EasyCall 2 User Manual

4.1

Switch Setting

The Switch on the back of the handset can be programmed to make a call and/or
send an SMS to friends or relatives simultaneously.
 Press Down > Down > Down > Down to get to the Settings Menu
 Go to Settings > Switch Setup > Switch to enable this feature. The switch is Off by
default.
 Go to Settings > Switch Setup > Switch Number to program your phone numbers:
1. The first location will define the voice call number.
2. Location 2-5 defines the SMS numbers.
 Go to Settings > Switch Setup > Switch SMS: To send an automated text message
you must enter a message in this field.
 When enabled and programmed, pushing the Switch Key will send an SMS
message to numbers 2-5 and initiate a call to the first defined number.
 The Alert tone (when enabled) will continue after the call until the Switch Key is
pushed back to the down position.
 When the call is connected the handset automatically enables Handsfree
(speaker-phone) mode.
 The alert tone volume can be adjusted to Off, Low, Medium or Loud
 In any state, push the Switch key down to return the phone to standby mode.
 Switch Dialling is still activated when the keypad is locked.
4

Step by step guide

17