Buffalo TS-XL User Manual page 85

Mapping Multiple Shares
If only unrestricted shares are being mapped, then it's not necessary to set a username and
password for shares. Multiple mapped drives to unrestricted shares can exist without a username
or password as long as no restricted, secure shares are mapped. If an unrestricted share and a
restricted share are being mapper or accessed, use the restricted username and password for the
unrestricted share login by using the Connect using a different user name option. This will allow a
Windows PC to access both shares without any problems.
When mapping any share, select the Connect using a different
user name option. A login and password prompt will appear.
Use the username and password required by any secure,
restricted shares for all shares.
single PC must use the same username and password!

All mapped shares on a