Adapter Connectors And Controls - BeachTek DXA-SLR ULTRA Operating Manual

Adapter Connectors and Controls

Front Panel
PWR Switch
1
Main power switch for adapter
PWR LED
2
Green indicates power on and good battery condition
Red indicates low battery voltage
MONITOR Switch
3
Selects headphone monitoring from either the microphones during
5
recording, or playback audio from the camera
PHONES
4
Headphone jack to monitor the audio from microphones or camera
Volume Control
5
Adjusts the headphone volume level
M/S Switch
6
Selects mono or stereo output mode
5
LIN/MIC/PH Switches
7
Selects LIN for line level, or MIC for microphone level for each
5
input. The PH setting selects microphone level input and activates
phantom power.
PH VOLTAGE Switch
8
Selects either 12, OFF or 48 volt phantom power for condenser
5
microphones that require phantom power to operate
LEFT and RIGHT Controls
9
Individual adjustment controls to adjust output levels on each
5
channel
4