Continuous Navigation Mode; Gps Receiver Override (Advanced) - Humminbird 1157c Combo Installating And Operation Manual

fish around a particular waypoint, even if you pass over it multiple times.
To activate or de-activate Continuous Navigation:
1. Highlight Continuous Navigation Mode on the Navigation main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Continuous Navigation Mode On or Off
(Off, On, Default = Off)
GPS Receiver Override allows you to set which GPS receiver to use if you have multiple GPS receivers
plugged in to your system. These multiple GPS receivers may either be internal, external or connected via
the InterLink. If you select Auto, your unit will select a GPS receiver automatically.
NOTE: If only one GPS receiver is plugged into your system, then Auto will be the only option shown.
To activate or de-activate GPS Receiver Override:
1. Make sure you are in Advanced User Mode, then highlight GPS Receiver Override on the
Navigation main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to select which GPS receiver to use.
(Default = Auto)

Continuous Navigation Mode

Continuous Navigation Mode allows you to continue to navigate and
GPS Receiver Override
(Advanced)
146