Delete All Nav Data (Advanced); Continuous Navigation Mode - Humminbird 788c Operation Manual

2. Press the RIGHT Cursor key to export all navigation data. The Confirm
dialog box will appear. To confirm export, press the RIGHT Cursor key
once more. To cancel export, press the LEFT Cursor key.
NOTE: If no MMC card is installed, an error message will be displayed. Insert the MMC
card and try again.
Delete All Nav Data allows you to delete all saved Tracks, Waypoints, and
Routes. The Delete All Nav Data menu option is available when User Mode is
set to Advanced (see Main Menu: User Mode).
This menu option should be used with caution!
To Delete All Navigation Data:
1. Make sure the User Mode is set to Advanced, then highlight Delete All
Nav Data on the Navigation main menu.
2. Press the RIGHT Cursor key to delete all navigation data. The Confirm
dialog box will appear. To delete all navigation data, press the RIGHT
Cursor key once more. To cancel deleting all navigation data, press the
LEFT Cursor key.
continue to navigate and fish around a particular waypoint, even if you pass
over it multiple times.
To activate or de-activate Continuous Navigation:
1. Highlight Continuous Navigation Mode on the Navigation main menu.
2. Press the LEFT or RIGHT Cursor keys to turn Continuous Navigation
Mode On or Off. (Off, On, Default = Off)
Delete All Nav Data
(Advanced)

Continuous Navigation Mode

Continuous Navigation Mode allows you to
133 Navigation Menu Tab